Home
Up
Notice Board
Conference
WCPC Academy
Facilities
Equipment
projects
Personal Development
Technology transfer
Centre Staff
Contacts
Links
Local information

Exchange Projects  

The centre actively participates in exchange projects with Universities and companies throughout the world and are able to offer projects for exchange students.  Please see list below for the projects currently available.

Project title Project coordinator
Printed line definition Dr Eifion Jewell
Effect of cylinder engraving in gravure printing Dr Eifion Jewell
Analysis of speed and viscosity on printed colour Dr David Bould
Effect of substrate and blanket roughness on print quality Dr David Bould
Substrate roughness, porosity and absorbency in flexographic printing Dr David Bould

Previous exchange student projects (summaries not currently available)

  • Mark Tanguy - "Print degradation or catastrophic failure", University of Rennes, 2007.
  • Hermine Chatoux
  • Damien Atle - "Measurement of Flexography Dots", ISTIA, University of Angers, 2006
  • Guillaume Fabry-Cassin - "Evaluation of PlateCell Patterning", ISTIA, University of Angers, 2006
  • Hana
  • Robert
  • Anne Laure
  • Aurore
  • Claire Swiderski - "An investigation into Dot Slur in Offset Lithography" - ISTIA, University of Angers, 2006
  • Fanch Michelet - "The scanner as a Colour Measurement device" - ISTIA, University of Angers, 2006
  • Barabara Mocenik - "The Effect of Offset ink Temperature on Optical Density"
  • Sebastian Cuquemelle - "Effect of print parameters on offset blanket ink transfer"- ISTIA, University of Angers, 2005 
  • Perrine Chastan - "Effect of blanket packing configurations on printed dot slur" - ISTIA, University of Angers, 2005
  • Simon Boisserpe - "Effect of blanket roughness on printability" - ISTIA, University of Angers, 2005
  • Olivier Dubois - "Printed line definition" - ISTIA, University of Angers, 2005
  • Marina Gautier - "Cell roughness in gravure printing" - ISTIA, University of Angers, 2005
  • Dorian Darracq - "Ink Transfer to and from offset printing blankets", 2004
  • Julien Mendoza - "Numerical modelling of a flexographic printing plate", 2004
  • Jerome Diard - "Characterisation of reproducibility of a belt screen printing press", 2004
  • Jean-Marie Jegat - "An investigation into the loading of an ink duct blade", 2004
  • Christophe Heudre - "Print consistency of the belt screen process", 2004
  • Aurepien Ciarvavino -"Line reproduction in gravure printing", 2004
  • Guillame vanfleury - "Line reproduction in gravure printing", 2004
  • Valeriare Vigne - "The effect of speed and viscosity on line, type and solid quality in rotogravure printing", EFPG Grenoble 2004.
  • Marina Le Marchand - "Offset printing of electronics to paper", Agen, 2004
  • Guillame Boutin - "Factors affecting wet ability of offset blankets", Agen, 2004
  • Renaud Favre - "Handling issues of a flexible woven mesh", IUT Lyon, 2003
  • Andrea Manuzio - "An investigation into the ink removal requirements a High Speed Belt Screen Press", Genova 2003
  • Francois Balere - "Colorimetric testing of inks for lithographic newsprint", IUT Poitiers, 2003
  • Marien Paret - "Evaluation of gravure manufacturing engraving", IUT Poitiers, 2003
  • Ali Merchich - "Investigation into offset printing blankets" - IUT Lyon, 2003
  • Gaelle Lejeune - "Investigation into print mottle", IUT Poitiers, 2003
  • Francoise Dogocho - "Flexographic plate characterisation" - ISTIA, University of Angers, 2003
  • Aurelien Pothin - "Quality control procedures using draw-down testing methodology" IUT Lyon, 2003
  • Nicolas Sciandra - "Flexographic printability testing using the IGT-F1", IUT Lyon, 2003
  • Marc Le Meut - "Colorimetric testing of flexographic process colour inks" - ISTIA, University of Angers, 2003
  • Paul Palies - "Investigation into Scumming", Nantes, 2002
  • Max Von Grol - "Modelling roll cooling in the printing and coating processes", Universtaet GH, Essen, 2000
  • Nicolas  Augereau - "Agile Printing Press - Web Handling" - ISTIA, University of Angers, 1999
  • Vladimir Din - "Emulsion and screen characteristics", British Council IAESTE programme, Kazak State Technical University, June 1998.
  • Christophe Gautreau - "The effect of squeegee parameters on printing of compact disks", Agen University March 1998
  • M. Broussley - "Software interfacing a hand held spectrophotometer", Agen University 1995
  • N. Ridoux -"Consistency in graphic screen printing", Agen University March 1995.
  • G. Salas - "An investigation into the relationship between squeegee systems, ink colour and speed in the screen printing process: Part 2 :Forces induced", Seville University 1995
  • J.M Miguel - ""An investigation into the relationship between squeegee systems, ink colour and speed in the screen printing process: Part 1: Image characteristics", Seville University 1995.

    •  

    The Welsh Centre for Printing and Coating, School of Engineering, Swansea University, Singleton Park, Swansea, UK SA2 8PP
    Telephone: +44 (0)1792 295091  Fax +44 (0)1792 295814
    Last updated on 16/09/09 by: G.R.Davies@swan.ac.uk