|
| | Conference
Publications
The centre is involved in all types of research
linked with the printing and coating industries.
The centre also hosts its
own
research conference .
Journal publications are
also available
|
2011 |
|
Influence and interaction phenomena of
screen printing machine settings on surface roughness |
|
Ingmar Petersen, Gunter Hübner, Tim C.
Claypole and Eifion Jewell |
|
IARIGAI
2011 proceedings: Advances in Printing and Media Technology, Vol.
38, Budapest &
Debrecen, 2011 |
|
|
|
Plasma Functionalised Carbon Nanotubes for
use in Functional Inks |
|
Neil Graddage |
|
LOPE-C 2011,
June, Frankfurt, Germany. |
|
|
|
Application of Printing Technologies for
Pyrotechnic Delays |
|
William Beer |
|
Europyro 2011, May 2011, Reims, France |
| |
|
2010 |
|
The impact of paper coatings on printed
electronics. |
|
Bould, D., Claypole, T., Gethin, D. |
|
IARIGAI
2010 proceedings: Advances in Printing and Media Technology, Vol.
37, Montreal, 2010 |
| |
|
Ink mist formation in roller trains. |
|
Claypole, T., Bould, D., Vlahopoulos, G. |
|
IARIGAI
2010 proceedings: Advances in Printing and Media Technology, Vol.
37, Montreal, 2010 |
|
|
|
The effect of surfact properties on the
printability of flexographic printing plates, |
|
D. Galton, D.C. Bould, T.C. Claypole |
|
IARIGAI
2010 proceedings: Advances in Printing and Media Technology, Vol.
37, Montreal, 2010 |
| |
|
2009 |
|
An investigation into the performance of biodegradable plastic
electronics by flexography |
|
David Bould, Tim Claypole, David Gethin |
|
IARIGAI
2009 proceedings: Advances in Printing and Media Technology, Vol.
36,
Stockholm, 2009. |
| |
|
Ink ribbing in printing nips |
|
Tim C. Claypole, Georgios Vlachopoulos,
David C. Bould |
|
IARIGAI
2009 proceedings: Advances in Printing and Media Technology, Vol.
36,
Stockholm, 2009. |
| |
|
Effect of plate technology and orientation
on flexographic line deformation |
|
Korochkina TV, Cherry J.A., Claypole T.C.
and Gethin D.T. |
|
Proceedings of the 6th European Conference
for Constitutive Models for Rubber, 2009, pp. 383-388 |
| |
|
Towards all R2R printed SMOLED For Lighting,
Signage and Display |
|
K.R. van den Hoonaard, S. Harkema, I. de
Vries, G. Kirchner, J. J. Michels, D. Deganello, J.A. Cherry, E.W.A.
Young, |
|
The XVII International Display Workshop
(Japan), IDW’09 proceedings pp.1619-1622, 2009 |
| |
|
2008 |
|
Ink Transfer during
flexographic printing to paper. |
|
T.C.
Claypole, D.G. Beynon, S.M. Hamblyn. |
|
35th IARIGAI Conference,
Valencia, 2008. |
|
|
|
The impact of conductive
carbon properties on print performance. |
|
E.H.
Jewell, T.C. Claypole & S.R. Roberts and D.C. Bould. |
|
35th IARIGAI Conference,
Valencia, 2008. |
|
|
|
Influence of paper and
ink combination on the physical characteristics of newsprint. |
|
Tim
C. Claypole, Eifion H. Jewell, Nigel Wells and Paul Casey. |
|
TAGA Conference, San
Francisco, 2008. |
| |
|
Flexo printing of fine
lines. |
|
Tim
C. Claypole, David Bould, Richard Hall, Eifion Jewell and David Gethin. |
|
TAGA Conference, San
Francisco, 2008. |
|
|
|
Break-up in Capillary Thinning Experiments:
Using the CaBER to determine maximum tensile strength at low stressing
rates |
|
A. Lubansky, R. Brad, P. R. Williams, D.
Deganello, T.C Claypole, D.T. Gethin |
|
The XV International Congress on Rheology:
The Society of Rheology 80th Annual Meeting. AIP Conference Proceedings,
Vol.1027, pp. 1120-1122 , 2008 |
|
|
|
Transient Extensional Rheology of an Aqueous
Gelatin Solution: Before and During Gelation, |
|
A. Lubansky, R. Brad, P. R. Williams, D.
Deganello |
|
The XV International Congress on Rheology:
The Society of Rheology 80th Annual Meeting. AIP Conference Proceedings,
Vol.1027, pp. 609-611, 2008 |
|
2007 |
|
An investigation into deformation of photopolymer plate
during printing solid lines in flexography. |
|
M.S. Yusof, T.V. Korochkina, T.C. Claypole
and D.T. Gethin. |
|
Proceedings of the 5th European Conference
for Constitutive Models for Rubber, 2007, pp.433-438. |
|
|
|
Mechanical characterisation and
modelling of silicone rubbers used for pad
printing. |
|
T.V. Korochkina, T.C. Claypole and D.T.
Gethin. |
|
Proceedings of the 5th European Conference
for Constitutive Models for Rubber, 2007, pp.405-412. |
|
|
|
Effect of Viscosity on Halftone
Reproduction in Rotogravure Printing. |
|
G.R.
Davies, S.M. Hamblyn, T.C. Claypole and D.T. Gethin. |
|
TAGA 2007. |
|
|
|
Analysis of interferometric
data to obtain accurate geometric characterization of engraved cells. |
|
D.
Deganello, T. C. Claypole, D. T. Gethin. |
|
IARIGAI 2007 proceedings: Advances in Printing and Media Technology,
Vol. 34, pp. 77-84, 2007. |
|
|
|
Modelling the
anilox-plate micro contact. |
|
D. Bould,
S. M. Hamblyn, J. A. Cherry, T. C. Claypole. |
|
IARIGAI 2007
proceedings: Advances in Printing and Media Technology, Vol. 34. |
|
|
|
The
development of six colour
separation algorithms. |
|
E. H.
Jewell, T. C. Claypole, B. Palmer. |
|
IARIGAI 2007
proceedings: Advances in Printing and Media Technology, Vol. 34. |
|
|
|
Influence
of paper and printing processes on the visual perception and
colorimetric characteristics of newsprint. |
|
T. C.
Claypole, E. H. Jewell, N. Wells, P. Casey. |
|
IARIGAI 2007 proceedings: Advances in Printing and Media Technology,
Vol. 34. |
|
|
|
The effect of Viscosity on Gravure Printing |
|
G. Davies & T.C. Claypole. |
|
IARIGAI 2007 proceedings: Advances in Printing and Media Technology,
Vol. 34. |
|
2006 |
|
The effect of viscosity on ink transfer in gravure printing. |
| G. Davies, Tim
Claypole. |
|
IARIGAI 2006 proceedings: Advances in Printing and Media Technology,
Vol. 33 , Leipzig September 2006. |
| |
|
Evaluation of neural networks for modelling ink transfer in the gravure
printing process. |
| D. Deganello, T.
Claypole, D. T. Gethin. |
|
IARIGAI 2006 proceedings: Advances in Printing and Media Technology,
Vol. 33 , Leipzig September 2006. |
| |
|
The
effect of process characteristics on image reproduction in flexographic
printing. |
| D. C. Bould et al. |
|
IARIGAI 2006 proceedings: Advances in Printing and Media Technology,
Vol. 33 , Leipzig September 2006. |
| |
|
A
parametric study of cylinder press screen printing. |
| T.C Claypole, E.H
Jewell & D.T Gethin. |
|
IARIGAI 2006 proceedings: Advances in Printing and Media Technology,
Vol. 33 , Leipzig September 2006. |
| |
|
The Effect of Substrate and Blanket
Roughness on Ink Transfer. |
| D. C. Bould, T.C.
Claypole. |
|
Printing Technology sPb 2006, St Petersberg. |
| |
|
Anilox maintenance", Printing Technology. |
| J. Cherry, D. C.
Bould, T.C.
Claypole. |
|
Printing Technology sPb 2006, St Petersberg. |
| |
|
Printing as an Industrial Process:
Manufacturing Emissive Displays. |
| W.J. Ray, T.C.
Claypole & E.H. Jewell. |
|
TAGA
2006. |
| |
|
Process
line quality in
the gravure process. |
| E.H. Jewell, T.C.
Claypole & G. Davies. |
|
TAGA 2006. |
| |
|
Measurement of ink release from the anilox
roll. |
| T.C. Claypole &
J. Cherry |
| TAGA 2006. |
| |
|
The effect of blanket packing configurations on image reproduction in
offset printing. |
|
D. Bould & T.C. Claypole. |
|
TAGA 2006. |
|
2005 |
| A
new methodology for the use of a printability tester for the
simulation of flexographic halftone printing onto film
substrates. |
|
S.M. Hamblyn, T.C.
Claypole and D.T. Gethin. |
|
Proceedings of IARIGAI
September 2005. |
| |
|
The development of a six colour
ink system for enhanced colour gamut. |
| M. Wilcox, T.C.
Claypole & E.H. Jewell - |
|
IARIGAI
2005 proceedings: Advances in Printing and Media Technology, Vol.
32, Grenoble September 2005. |
| |
|
The effect of speed and
viscosity on line quality in rotogravure printing with reference to
printed electronics. |
| T.C. Claypole, G.R
Davies, E.H. Jewell+ & V. Vigne- |
|
IARIGAI
2005 proceedings: Advances in Printing and Media Technology, Vol.
32, Grenoble September 2005. |
| |
|
Choosing
constitutive models for elastomers used in printing processes. |
| T.V. Korochkina, T.C.
Claypole & D.T. Gethin - |
| Proceedings
of the 4th European Conference for Constitutive Models for Rubber, ECCMR 2005, Stockholm, Sweden, 27-29 June 2005,
pp.431-435. |
| |
|
A
Study Of Maintenance Practice In The Printing Industry Presented |
|
E. Jewell, N. Wells, and T.C. Claypole. |
|
TAGA 2005. |
| |
|
Two-
and Three-Dimensional characterization of Screen-Printed Lines. |
|
E. H. Jewell, T. C. Claypole, and D. T. Gethin. |
| TAGA
2005. |
| |
|
Measurement
of the Cell Volume of Anilox Rolls. |
|
- J. Cherry, S. Hamblyn, M. F. Bohan, T. C. Claypole, and D. T. Gethin,
|
| TAGA
2005 |
| |
|
Consistency
of Flexographic Platemaking. |
| S.
Hamblyn, D. Bould,
M. F. J.Bohan, T. C. Claypole, and D. T. Gethin. |
| TAGA
2005 |
| |
|
Rheological
Study of Two-Component Inks for Pad Printing on Lenses. |
| T.V.
Korochkina, P.A. Brame, T.C. Claypole, and D.T. Gethin. |
| TAGA
2005 |
| |
|
Automatic
Viscosity Control in Gravure Printing. |
| G.R.
Davies, G. Hawthorne, and T. C. Claypole. |
| TAGA
2005. |
| |
|
The Effect of
Diamond Geometry and Wear on Rotogravure Engraving. |
| A. Clist, M. F. J. Bohan, and T.C. Claypole. |
| TAGA
2005 |
|
2004 |
|
The influence of viscosity in rotogravure halftone
reproduction. |
|
M.F.J Bohan and T.C.
Claypole. |
|
International printing and Graphic arts
conference, British Columbia, October 4-6, 2004. |
| |
|
The influence of engraving specifications, ink viscosity and
substrate on the printability of lines using rotogravure
printing. |
| M.F.J Bohan and T.C.
Claypole. |
| International
printing and Graphic arts conference, British Columbia, October 4-6,
2004. |
| |
|
The
Effect of Speed and Viscosity on Line Quality in Rotogravure
Printing. |
| Tim C. Claypole, G.
R. Davies, E. H. Jewell, V. Vigne. |
|
IMAPS 3rd Advanced Technology Workshop. on
Printing an Intelligent Future: Printed Organic and Molecular
Electronic Technologies, Maryland September 28 - 30, 2004. |
| |
|
Characterisation Methods
for Printed Thin Film Electronics. |
| Tim C. Claypole, E.
H. Jewell D, T. Gethin. |
|
IMAPS 3rd Advanced Technology Workshop on Printing an Intelligent
Future: Printed Organic and Molecular Electronic Technologies, Maryland
September 28 - 30, 2004. |
| |
|
The
effect of speed on gravure printing. |
|
T.C. Claypole and G. Davies. |
|
Submitted to IARIGAI, Research Conference in Copenhagen, Denmark, 5-8 of
September 2004. |
| |
|
Tone gain due to deformation of the
flexographic plate. |
| D.C. Bould, T.C. Claypole and D.T.
Gethin, |
| Submitted to IAGRI, Copenhagen 2004. |
| |
|
Micro-Electronic
Printing: The State of the Art, Current Research Activities and the
Future Potential. |
| Tim C. Claypole,
David T. Gethin and Eifion. H. Jewell. |
|
Keynote Address, TAGA 2004. |
| |
|
Deformation of
Flexographic Printing Plates. |
| D.C. Bould, T.C. Claypole, and D.T.
Gethin. |
|
TAGA April 2004 |
| |
|
Process Stability in
Five-Colour Pad Printing of Contact Lenses. |
| T.V. Korochkina, P.A. Brame, T.C.
Claypole, and D.T.Gethin. |
| TAGA
April 2004. |
| |
|
Scumming: The Influence of the Cylinder. |
| M.F.J. Bohan, A.M. Clist, T.C. Claypole
and D.T. Gethin |
|
TAGA April 2004.
|
| |
| Printing of conducting inks on paper. |
| Tim C. Claypole, E.H. Jewell, W. J.
Ray and Y. Berri. |
|
TAGA April 2004.
|
|
2003 |
|
Screen printed surface
topology measurement. |
| E.H Jewell, T.Barden, T.C Claypole and
D.T. Gethin. |
| TAGA MicroTech
Swansea, November 2003. |
| |
|
Developing Test Methods to Quantitatively
Analyse Pad Printed Tablets. |
| Korochkina T.V., Burke F.M., Claypole
T.C., Gethin D.T. |
|
TAGA MicroTech Swansea, November 2003.
|
| |
|
Characterisation of Fine Lines. |
| E.H. Jewell, T. Barden, T. C. Claypole,
and D. T. Gethin |
| TAGA April 2003. |
| |
|
The Optical Properties of IMD
Film. |
| C.O. Phillips, E.H. Jewell, T.C.
Claypole* and D.T. Gethin |
| TAGA April 2003. |
| |
|
Improving the Speed and
Resolution of Screen-Printing for Industrial Applications. |
| I. J. Fox , M. F. J. Bohan, T. C.
Claypole, and D. T. Gethin - |
| TAGA April
2003. |
| |
|
The impact of ink rheology on the image transfer
mechanism in screen printing. |
| EH Jewell, TC Claypole and DT Gethin. |
| Institure of Non Newtonian fluid mechanics,
conference on rheometry, Miskin Manor, April 2003. |
| |
|
Evaluation of pressures in
flexographic prrinting. |
| M. F. J. Bohan, P. Townsend, S. M.
Hamblyn, T. C. Claypole, D. T. Gethin. |
| 55th TAGA Tech. Conf., 2003. |
| |
|
Analysis of doctor blade loading and wear. |
| M. F. J. Bohan, T. V. Korochkina, T. C.
Claypole, D. T. Gethin. |
|
55th TAGA Tech. Conf., 2003. |
|
2002 |
|
'Thermal Transients on a Web Offset Press'. |
| T. C Claypole, D. C Bould, D. T Gethin. |
|
Proc TAGA
Conference, 2002. pp. 216-230. |
| |
|
An Improved Method for the Routine Measurement of Ink Colorimetrics. |
| T. C. Claypole, P. Townsend. |
| Proc TAGA Conference 2002, publication. pp. 302-323. |
| |
|
Parametric study of the flow in printing
and coating nips: The influence of non-Newtonian fluids. |
| M. F. J. Bohan, I. J. Fox, T. C.
Claypole, D. T. Gethin. |
|
54th TAGA Tech. Conf., 2002.
pp. 198-215. |
| |
|
Numerical Model Of Surface Roughness And Its Effect On
Fluid Transfer. |
| M.F.J. Bohan, I.J. Fox, T.C. Claypole,
D.T. Gethin. |
|
Proc. 11th IPGAC Int. Printing and Graphics Arts Conf., 2002. |
|
2001 |
|
Characterisation of Gravure Cylinders'. |
| M. F. J. Bohan, T. C. Claypole, A.
M. Clist, D. T. Gethin. |
| TAGA 2001, p1-12. |
| |
|
Dynamic Measurement of Ink Film Thickness, Pressure and
Temperature in Rolling Contacts. |
| M. F. J. Bohan, T.C. Claypole, D. T.
Gethin. |
|
TAGA 2001, p111-124. |
| |
|
Roughness modelling of soft elastohydrodynamic lubrication contacts. |
| M. F. J. Bohan, T.C. Claypole, D. T.
Gethin. |
| ECCOMAS CFD
2001. |
|
1998 |
|
Boundary Element Modelling of Printing and Coating Nips in Sliding
Contact. |
| M.F.J. Bohan, T.C. Claypole, D.T Gethin. |
|
Proc TAGA 1998, pp. 371-387. |
| |
|
An Investigation into ink Transfer in Rotogravure Printing. |
| M.F.J. Bohan, T.C. Claypole, D.T Gethin. |
|
Proc TAGA 1998, pp. 484-494. |
| |
|
The Use of Orthogonal Array
Techniques in Printing Research. |
| M. F. J. Bohan, T. C. Claypole, J. T.
Anderson, E. H. Jewell, M. Ahmed. |
| Int Printing and Graphic Arts Conf., Quebec, October
1998. pp.31-40. |
| |
|
A Model for Ink Impression in Rolling
Printing Contacts. |
| M. F. J. Bohan, T. C. Claypole, D.
T.Gethin, M. Ahmed. |
| Int Printing and Graphic Arts Conf., Quebec, October 1998. pp.
41-48. |
| |
| 'The development of software for the prediction of moiré in
screen printing', |
| E. H. Jewell T. C. Claypole D. T. Gethin
|
|
1st International printing and coating symposium, Swansea 1998. |
| |
|
'The development of ISO standards for the
graphic screen printing. |
| T. C. Claypole, E. H. Jewell, M. F.
J. Bohan, D. T. Gethin, |
| Ist Int. Symp. on Printing and Coating Technology, Swansea, September 1998. |
|
1997 |
|
Application of Boundary Element Modelling to
Printing Presses. |
| M.F.J.Bohan, T.C.Claypole, D.T.Gethin,
S.B. Basri. |
|
Proc TAGA 97, published by TAGA, pp. 135-148. |
| |
|
Thermal Balance of Sheet Fed Offset Press and its Effect on Ink
Transfer. |
| M.F.J.Bohan, T.C.Claypole, D.T.Gethin. |
|
Proc TAGA 97, published by TAGA, pp. 590-607. |
| |
|
Development of a System for the Prediction of
Screen Printed Halftone Densities. |
| E. H. Jewell, T.C.Claypole, D.T.Gethin,
J.T. Anderson. |
| Proc TAGA 97, published by TAGA, pp. 622-638. |
|
1996 |
|
An Investigation of Rubber Roll Distortion in a Web Offset Press. |
| T.C. Claypole, D.T. Gethin, C.H. Lim, M
.F.J. Bohan, S.B. Basri ' |
| Proc. TAGA, 1996, Dallas, pp. 493-504. |
| |
|
Distortion of the Image by the Screen Printing Process. |
| T.C. Claypole, D.T. Gethin, E.H. Jewell,
W.J. Appleton. |
|
Proc. TAGA, 1996, Dallas, pp. 69-85. |
| |
|
An evaluation of print to print variation in web offset, sheet
offset and gravure printing. |
| M.F.J.Bohan, T.C.Claypole, D.T.Gethin. |
|
14th Int. Symp. on Graphic Arts, Zagreb, Croatia, 6th-8th
November 1996. |
|
1995 |
|
The Application of Taguchi Methods to the Study of Ink Transfer in
Heat Set Web Offset Printing. |
|
M.F.J. Bohan, T.C. Claypole, D.T. Gethin. |
|
47th Annual TAGA Tech. Conf., Orlando, Florida, April
1995, pp. 513-530. |
|
|
|
The application of orthogonal array analysis to
the screen printing process. |
|
W. Appleton, T.C Claypole & E.H
Jewell. |
|
1995 European Taguchi methods & QFD Symposium,
May 1995. |
|
|
|
Factors Affecting the Process Stability of a Heat Set Web Offset
Press. |
|
M.F.J. Bohan, T.C. Claypole, D.T. Gethin. |
|
1st TAGA/IARIGAI Tech. Conf., Paris, France, September 1995, pp. 1077-1094. |
|
1994 |
|
An experimental investigation of heat set web-offset
printing. |
|
M. F. J. Bohan, T. C. Claypole, D. T.
Gethin, C. H. Lim, B. J. Roylance |
|
1994 European Taguchi Methods and QFD Symp., May 1994. |
The Welsh
Centre for Printing and Coating, School of Engineering, Swansea University,
Singleton Park, Swansea, UK SA2 8PP
Telephone: +44 (0)1792 295091 Fax +44 (0)1792 295814
Last updated on
08/06/11
by: G.R.Davies@swan.ac.uk |
