|
| | Journal
Publications
A list of
conference publications is also available.
|
2011 |
|
Ultrafast
near-infrared sintering of a slot-die coated nano-silver conducting ink |
|
Martyn
Cherrington, Tim C. Claypole, Davide Deganello, Ian Mabbett, Trystan
Watson and David Worsley |
|
J. Mater. Chem., 2011, Advance Article |
|
|
|
Numerical simulation of dynamic contact
angle using a force based formulation |
|
D. Deganello, A.J. Williams, T.N. Croft, A.S.
Lubansky, D.T. Gethin, T.C. Claypole, |
|
Journal of Non-Newtonian Fluid Mechanics,
approved for publication in 2011 |
| |
|
Measuring maximum tensile strength of
liquids at low stressing rate |
|
A.S. Lubansky, R. Brad, P.R. Williams, D.
Deganello, T. C. Claypole, |
|
Journal of Non-Newtonian Fluid Mechanics,
approved for publication in 2011 |
| |
|
2010 |
|
The Effect of Impression pressure and anilox
specification on solid and halftone density. |
|
D.C. Bould, S.M. Hamblyn, D.T. Gethin and
T.C. Claypole |
|
Accepted for Publication, IMechE pt B |
|
|
|
Patterning of micro-scale conductive
networks using reel-to-reel Flexographic Printing |
|
D. Deganello, J.A. Cherry, D.T. Gethin, T.C.
Claypole |
|
Thin Solid Films 518: 6113–6116 , 2010
doi:10.1016/j.tsf.2010.05.125 |
|
|
|
Level set method for the modelling of liquid
bridge formation and break-up |
|
D. Deganello, A.J. Williams, T.N. Croft, A.S.
Lubansky, D.T. Gethin, T.C. Claypole |
|
Computers & Fluids 40: 42-51, 2011
doi:10.1016/j.compfluid.2010.08.002 |
|
|
| 2008 |
|
Experimental and numerical investigation
into nonlinear deformation of silicone rubber pads during ink transfer
process. |
|
T.V. Korochkina*, E.H. Jewell, T.C.
Claypole, D.T. Gethin |
|
Polymer Testing, 27, pp778-791, 2008 |
| |
|
Finite element modelling of low temperature
forming of polymer films with application in in-mould decoration. |
|
C.O. Phillips *, D.C. Bould, T.C. Claypole,
D.T. Gethin, |
|
J. Materials and Design, 2008 |
| |
|
Development
of measurement techniques to characterize the optical properties of
transparent films with application in in-mould decoration.
|
|
Phillips C.O., Jewell E.H., Claypole T.C.
and Gethin D.T. - |
|
2008 Meas. Sci. Technol.
19 025703 (11pp) |
|
|
|
Mechanical
properties of polymer films used in in-mould decoration. |
|
Phillips C.O., Claypole T.C. and Gethin D.T. - |
|
2008
J. Mater. Process. Technol. at press. |
|
|
|
The influence of squeegee parameters on ink deposit
in UV halftone screen printing |
|
Eifion H. Jewell, Tim C. Claypole and
David T. Gethin - |
|
TAGA Journal, Volume 3, pp 80 - 89 |
|
|
|
Developing
Test Methods to Quantitatively Analyse Pad Printed Tablets. |
|
Tatyana Korochkina*,
Frances Burke**, Tim Claypole*, David Gethin* |
|
TAGA Journal. Volume 2 |
|
|
|
The potential for using colour profiling for UV graphic
screen printing. |
| Eifion
H. Jewell, Tim C. Claypole |
|
TAGA Journal. Volume 2, pages 29-42. |
|
2004 |
|
The
Effect of Exposure to Inks and Solvents on Squeegee Performance. |
| E.H Jewell, T.C
Claypole and D.T. Gethin |
|
Surface coatings international Part B:
Coatings transactions, Journal of the Oil and colour chemists
association, December 2004, Vol87, B4 ISSN 1476-4865 |
|
|
|
An
Investigation into plate deformation in flexographic printing. |
|
D.C. Bould, T.C. Claypole, and M.F.J. Bohan |
|
IMechE part B, Vol 218, pp 1499 - 1511, 2004 |
|
|
|
An Experimental Investigation into Flexographic
Printing Plates. |
| D.C. Bould, T.C. Claypole, and M.F.J.
Bohan |
|
TAGA Journal of Graphic Technology Volume 1, No. 3, 2004.
|
| 2003 |
|
Influence of non-Newtonian
fluids on the performance of a soft elastohydrodynamic nip contact
with surface roughness. |
| Bohan, M.F.J., Fox,
I.J., Claypole, T.C. and Gethin, D.T. |
| IMechE part J, vol 217, pp 447-459, 2003. |
| |
|
Viscosity
Control in the Screen Printing of Ceramic Transfers. |
|
E. H. Jewell, T. C. Claypole, D. T. Gethin |
|
published in Surface coatings international,
Part B. Vol 86, B2,91-168, June 2003. |
|
|
|
Two-Dimensional Simulation of the
Transfer Pad in Pad Printing. |
| T.V.Korochkina, E.H.Jewell, T.C.Claypole,
D.T.Gethin, M.F.J.Bohan |
|
Published in the TAGA Journal of Graphic
Technology, June 2003. |
|
|
|
Film Thickness Prediction in Half Tone
Screen-Printing. |
| Fox I. J., Bohan M. F. J., Claypole T.
C., Gethin D. T. |
| Proc. Instn. Mech. Engrs. Vol.217, Part E: J. Process
Mechanical Engineering, 2003. |
|
|
|
An Experimental Investigation Into Ink Transfer Using a
Roller Squeegee in High Speed Screen Printing. |
| Fox I. J., Claypole T. C., Gethin D. T. |
| Proc. Instn. Mech. Engrs.
Vol.217, Part E: J. Process Mechanical Engineering, 2003. |
|
|
|
Print Sharpness Evaluation using Image Analysis and a
New Peak Area Algorithm. |
| Fox I. J, Claypole T. C., Bohan M. F. J., |
| Proc. Instn. Mech. Engrs. Imaging Science J. Vol.51,
2003. |
|
2002 |
|
The Application of Roughness Model to a Soft EHL Contact.
|
|
M. F.J. Bohan, T. C. Claypole, D. T.
Gethin |
|
International Journal of Numerical Methods for Heat and Fluid Flows, 12,
2002, p356-375 |
|
|
|
Numerical Modelling of Elastohydrodynamic Lubrication in Soft Contacts Using non-Newtonian Fluids. |
|
M. F. J. Bohan, I. J. Fox, T. C.
Claypole, D.T. Gethin |
|
International Journal of Numerical Methods for Heat and Fluid Flows, 12,
2002, p494-511 |
|
|
|
An Investigation into Screen
Printing Using UV Process Colour Inks. |
|
S. M. Hamblyn, E. H. Jewell, T. C.
Claypole, D. T. Gethin |
|
Surface Coatings International, Part B: Coatings Transactions, 85, 2002 |
|
2000 |
|
Hydrodynamic
interactions in the screen printing process. |
| J. T. Anderson, D. T. Gethin, T. C.
Claypole, E. H. Jewell, M. F. J. Bohan, T. V. Korochkina |
|
J. Prepress & Printing Technology, pp10-17, March 2000. |
| |
|
A Model for Ink Impression in Printing Contacts. |
| M. F. J. Bohan, T. C. Claypole, D. T.
Gethin ' |
| JPPS,
26, 2000, p414-419. |
| |
|
The Effect of Process Parameters on Product Quality of
Rotogravure Printing. |
| M. F. J. Bohan, T. C. Claypole, D. T.
Gethin. |
|
Proc I Mech E (B), 214, 2000, p205-219. |
|
1999 |
|
An Investigation into the Effect of Process Parameters
on the Ink Supply Characteristics to a Roller Train in an Offset Printing Press. |
| M. F. J. Bohan, T. C. Claypole, D. T.
Gethin |
|
Journal of Prepress and Printing Technology, 3, 1999, pp.4-11. |
| |
|
Squeegee Behaviour Measurement and Modelling for
graphics printing. |
| J. T. Anderson, T. C. Claypole, D. T.
Gethin
|
|
Journal of Prepress and Printing Technology 4,1999, p.p. 17-25.
|
| |
|
The Tensioning Characteristics of a Polymeric Mesh
Material. |
| J. T. Anderson, T. C. Claypole, D. T.
Gethin |
|
Journal of Prepress and Printing Technology, 4, 1999, pp.26-33. |
|
1997 |
|
An
Investigation of the Hydrodynamic and Mechanical Behaviour of a Soft Nip in Rolling
Contact. |
| M. F. J. Bohan, C. H. Lim, T. V.
Korochkina, T. C. Claypole, D. T. Gethin, B. J. Roylance |
|
Proc I. Mech.E. (J), 211, 1997, pp. 37-43. |
| |
|
Dot Gain and Ink Transfer Behaviour in the Screen Printing Process. |
| T. C. Claypole, D. T. Gethin, J. Danias
|
| JOCCA, 80, 1997, pp. 222-229. |
conference publications
are also available.
The Welsh Centre for
Printing and Coating, School of Engineering, Swansea University, Singleton Park,
Swansea, UK SA2 8PP
Telephone: +44 (0)1792 295091 Fax +44 (0)1792 295814
Last updated on
21/04/11
by: G.R.Davies@swan.ac.uk
|
