Yr Athro James Sullivan

Athro, Materials Science and Engineering

+44 (0) 1792 602495

j.h.sullivan@abertawe.ac.uk

Swyddfa Academaidd - A228
Ail lawr
Adeilad Dwyreinol Peirianneg
Campws y Bae

Dolenni Ymchwil

Trosolwg

Mae ymchwil James Sullivan yn canolbwyntio ar y cysylltiadau rhwng microstrwythur ac ymddygiad cyrydu deunyddiau gyda diddordeb arbennig mewn aloion sinc ar gyfer amddiffyniad galfanig.

Mae James wedi datblygu techneg delweddu oedi amser newydd sy'n gallu delweddu mecanweithiau cyrydu ac ymosodiad cyfnod ffafriol ar ficrostrwythurau in-situ o dan ffilmiau electrolyt. Cafodd y gwaith ei gyflwyno yng Nghynhadledd Ymchwil bwysig Gordon ar lygriad dyfrllyd yn 2012 a chafodd ei gyhoeddi yn Corrosion Science.

Mae James yn gyd-gyfarwyddwr yr Academi Deunyddiau ym Mhrifysgol Abertawe sy'n darparu hyfforddiant hyblyg a hygyrch i fyfyrwyr mynediad safonol a gweithwyr diwydiannol yn amrywio o ddysgu seiliedig ar waith hyd at lefel doethuriaeth ac mae hyn wedi'i gyflawni gydag incwm grant o £15miliwn dros y pedair blynedd diwethaf.

Mae'r Academi Deunyddiau’n darparu hyfforddiant ac ymchwil i gasgliad mawr o bartneriaid yn y diwydiant gan gynnwys Tata Steel, BASF, Asiantaeth Ofod Ewropeaidd, Y Bathdy Brenhinol, NSG Pilkington a llawer o rai eraill.

Mae'r Academi Deunyddiau’n cynnal Canolfan EPSRC COATED2 ar gyfer hyfforddiant doethurol mewn haenau swyddogaethol diwydiannol a fydd yn hyfforddi 40 o ymchwilwyr doethuriaeth newydd o 2015 ymlaen. Mae hwn yn gynllun clodfawr ac mae'n un o ddim ond dwy ganolfan ar gyfer hyfforddiant doethurol a gynhelir yng Nghymru.

Uchafbwyntiau Gyrfa

Diddordebau Addysgu

Metelau: Gweithgynhyrchu ac Amddiffyniad Uwch
Sgiliau Rhyngbersonol i Beirianwyr

Adolygiad Llenyddiaeth o Broblemau Diwydiannol

Diraddiad deunyddiau
Ymwybyddiaeth o Gysylltiadau â Chyflogeion
Arloesi i Fasnacheiddio

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Bolton, R., Dunlop, T., Sullivan, J., Searle, J., Heinrich, H., Westerwaal, R., Boelsma, C., & Williams, G. (2019). Studying the Influence of Mg Content on the Microstructure and Associated Localized Corrosion Behavior of Zn-Mg PVD Coatings Using SVET-TLI. Journal of The Electrochemical Society, 166(11), C3305-C3315.
https://doi.org/10.1149/2.0391911jes, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50511
Wint, N., Khan, K., Sullivan, J., & McMurray, H. (2019). Concentration Effects on the Spatial Interaction of Corrosion Pits Occurring on Zinc in Dilute Aqueous Sodium Chloride. Journal of The Electrochemical Society, 166(11), C3028-C3038.
https://doi.org/10.1149/2.0051911jes, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa48421
Dunlop, T., Jarvis, D., Voice, W., Sullivan, J., & Sullivan, J. (2018). Stabilization of molten salt materials using metal chlorides for solar thermal storage. Scientific Reports, 8(1)
https://doi.org/10.1038/s41598-018-26537-8, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40539
Lewis, T., Sullivan, J., Cooze, N., Gallagher, C., Lewis, T., Prosek, T., & Thierry, D. (2015). In situ monitoring of corrosion mechanisms and phosphate inhibitor surface deposition during corrosion of zinc–magnesium–aluminium (ZMA) alloys using novel time-lapse microscopy. Faraday Discuss., 180, 361-379.
https://doi.org/10.1039/C4FD00251B, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa21370
Sullivan, J., Penney, D., Elvins, J., & Khan, K. (2016). The effect of ultrasonic irradiation on the microstructure and corrosion rate of a Zn–4.8wt.% Al galvanising alloy used in high performance construction coatings. Surface and Coatings Technology, 306, 480-489.
https://doi.org/10.1016/j.surfcoat.2016.01.050, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa26013
Wint, N., Leung, J., Sullivan, J., Penney, D., & Gao, Y. (2018). The galvanic corrosion of welded ultra-high strength steels used for automotive applications. Corrosion Science, 136, 366-373.
https://doi.org/10.1016/j.corsci.2018.03.025, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa39106
http://dx.doi.org/10.1016/j.corsci.2018.03.025
Wint, N., Sullivan, J., & Penney, D. (2017). The Role of pH on the Inhibition of Aqueous Zinc Corrosion by L-tryptophan. Journal of The Electrochemical Society, 164(7), C356-C366.
https://doi.org/10.1149/2.0981707jes, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa33650
Sullivan, J., Worsley, D., & Sullivan, J. (2002). Zinc runoff from galvanised steel materials exposed in an industrial marine environment. , 282-288.
https://doi.org/10.1179/000705902225006697, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa2034
Böhm, S., Sullivan, J., Worsley, D., & Sullivan, J. (2001). A New Corrosion Test For Organically Coated Galvanised Steel Products. , 540-545.
https://doi.org/10.1002/1521-4176(200107)52:7<540::AID-MACO540>3.0.CO;2-S, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa2035
Sullivan, J. & Whittaker, M. (2011). Variability in the mechanical properties and processing conditions of a High Strength Low Alloy steel. Procedia Engineering
https://doi.org/10.1016/j.proeng.2011.04.020, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5714

Holl Ymchwil

Erthyglau Cylchgronau

ALPARONE, G., Penney, D., Jewell, E., Sullivan, J., & Mills, C. (2023). The Effect of Sliding Speed on the Tribological Properties of Ceramic Materials. Materials, 16(23), 7252
https://doi.org/10.3390/ma16237252, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65094
http://dx.doi.org/10.3390/ma16237252
Malla, A., Sullivan, J., Penney, D., Dunlop, T., & Barker, P. (2023). Mechanistic study on the corrosion behaviour of Zinc and Zinc-Calcium alloys designed for enhanced metallic coatings in the presence of chloride and phosphate ions. Corrosion Science, 213, 110956
https://doi.org/10.1016/j.corsci.2022.110956, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa62266
Grech, I., Sullivan, J., Lancaster, R., Plummer, J., & Lavery, N. (2022). The optimisation of hot isostatic pressing treatments for enhanced mechanical and corrosion performance of stainless steel 316L produced by laser powder bed fusion. Additive Manufacturing, 58, 103072
https://doi.org/10.1016/j.addma.2022.103072, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60813
Wint, N., Malla, A., Cooze, N., Savill, T., Mehraban, S., Dunlop, T., Sullivan, J., Penney, D., Williams, G., & McMurray, H. (2021). The ability of Mg2Ge crystals to behave as ‘smart release’ inhibitors of the aqueous corrosion of Zn-Al-Mg alloys. Corrosion Science, 179, 109091
https://doi.org/10.1016/j.corsci.2020.109091, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55603
Bolton, R., Dunlop, T., Sullivan, J., Searle, J., Heinrich, H., Westerwaal, R., Boelsma, C., & Williams, G. (2019). Studying the Influence of Mg Content on the Microstructure and Associated Localized Corrosion Behavior of Zn-Mg PVD Coatings Using SVET-TLI. Journal of The Electrochemical Society, 166(11), C3305-C3315.
https://doi.org/10.1149/2.0391911jes, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50511
Wint, N., Cooze, N., Searle, J., Sullivan, J., Williams, G., McMurray, H., Luckeneder, G., Riener, C., Cooze, N., Searle, J., & McMurray, H. (2019). The Effect of Microstructural Refinement on the Localized Corrosion of Model Zn-Al-Mg Alloy Coatings on Steel. Journal of The Electrochemical Society, 166(11), C3147-C3158.
https://doi.org/10.1149/2.0171911jes, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa49978
Wint, N., Khan, K., Sullivan, J., & McMurray, H. (2019). Concentration Effects on the Spatial Interaction of Corrosion Pits Occurring on Zinc in Dilute Aqueous Sodium Chloride. Journal of The Electrochemical Society, 166(11), C3028-C3038.
https://doi.org/10.1149/2.0051911jes, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa48421
Wei, Z., Fung, C., Pockett, A., Dunlop, T., McGettrick, J., Heard, P., Guy, O., Carnie, M., Sullivan, J., & Watson, T. (2018). Engineering of a Mo/SixNy Diffusion Barrier to Reduce the Formation of MoS2 in Cu2ZnSnS4 Thin Film Solar Cells. ACS Applied Energy Materials, 1(6), 2749-2757.
https://doi.org/10.1021/acsaem.8b00401, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40527
Dunlop, T., Jarvis, D., Voice, W., Sullivan, J., & Sullivan, J. (2018). Stabilization of molten salt materials using metal chlorides for solar thermal storage. Scientific Reports, 8(1)
https://doi.org/10.1038/s41598-018-26537-8, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40539
Wint, N., Leung, J., Sullivan, J., Penney, D., & Gao, Y. (2018). The galvanic corrosion of welded ultra-high strength steels used for automotive applications. Corrosion Science, 136, 366-373.
https://doi.org/10.1016/j.corsci.2018.03.025, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa39106
http://dx.doi.org/10.1016/j.corsci.2018.03.025
Wint, N., Sullivan, J., & Penney, D. (2017). The Role of pH on the Inhibition of Aqueous Zinc Corrosion by L-tryptophan. Journal of The Electrochemical Society, 164(7), C356-C366.
https://doi.org/10.1149/2.0981707jes, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa33650
Sullivan, J., Penney, D., Elvins, J., & Khan, K. (2016). The effect of ultrasonic irradiation on the microstructure and corrosion rate of a Zn–4.8wt.% Al galvanising alloy used in high performance construction coatings. Surface and Coatings Technology, 306, 480-489.
https://doi.org/10.1016/j.surfcoat.2016.01.050, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa26013
Frankel, G., Thornton, G., Street, S., Rayment, T., Williams, D., Cook, A., Davenport, A., Gibbon, S., Engelberg, D., Örnek, C., Mol, A., Marcus, P., Shoesmith, D., Wren, C., Yliniemi, K., Williams, G., Lyon, S., Lindsay, R., Hughes, T...., & Sullivan, J. (2015). Localised corrosion: general discussion. Faraday Discuss.
https://doi.org/10.1039/c5fd90046h, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22331
Lewis, T., Sullivan, J., Cooze, N., Gallagher, C., Lewis, T., Prosek, T., & Thierry, D. (2015). In situ monitoring of corrosion mechanisms and phosphate inhibitor surface deposition during corrosion of zinc–magnesium–aluminium (ZMA) alloys using novel time-lapse microscopy. Faraday Discuss., 180, 361-379.
https://doi.org/10.1039/C4FD00251B, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa21370
Sullivan, J. & Whittaker, M. (2011). Variability in the mechanical properties and processing conditions of a High Strength Low Alloy steel. Procedia Engineering
https://doi.org/10.1016/j.proeng.2011.04.020, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5714
Sullivan, J., Mehraban, S., & Elvins, J. (2011). In situ monitoring of the microstructural corrosion mechanisms of zinc–magnesium–aluminium alloys using time lapse microscopy. Corrosion Science, 53(6), 2208-2215.
https://doi.org/10.1016/j.corsci.2011.02.043, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5720
Sullivan, J., Weirman, C., Kennedy, J., & Penney, D. (2010). Influence of steel gauge on the microstructure and corrosion performance of zinc alloy coated steels. Corrosion Science, 52(5), 1853-1862.
https://doi.org/10.1016/j.corsci.2010.02.032, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5717
Sullivan, J. & Worsley, D. (2009). Synthesis of nanostructured ruthenium microwires in domestic microwave oven. Materials Science and Technology
https://doi.org/10.1179/174328408X307283, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5716
Sullivan, J. & Worsley, D. (2009). Evolution and fractal growth of micro/nano structured wires of ruthenium synthesised by microwave irradiation of ruthenium dioxide. Materials Letters, 63(27), 2335-2338.
https://doi.org/10.1016/j.matlet.2009.07.065, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5719
Sullivan, J. (2008). Corrosion Performance Evaluation of Zn/Al Galvanized Steels Using the Scanning Vibrating Electrode Technique (SVET).
https://doi.org/10.1149/1.3040293, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5715
Elvins, J., Spittle, J., Sullivan, J., & Worsley, D. (2008). The effect of magnesium additions on the microstructure and cut edge corrosion resistance of zinc aluminium alloy galvanised steel. Corrosion Science, 50(6), 1650-1658.
https://doi.org/10.1016/j.corsci.2008.02.005, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5718
Sullivan, J., Worsley, D., & Sullivan, J. (2002). Zinc runoff from galvanised steel materials exposed in an industrial marine environment. , 282-288.
https://doi.org/10.1179/000705902225006697, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa2034
Böhm, S., Sullivan, J., Worsley, D., & Sullivan, J. (2001). A New Corrosion Test For Organically Coated Galvanised Steel Products. , 540-545.
https://doi.org/10.1002/1521-4176(200107)52:7<540::AID-MACO540>3.0.CO;2-S, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa2035

Cyfraniadau Cynadleddau

Mehraban, S., Malone, J., Lavery, N., Sullivan, J., Penney, D., & Brown, S. (2017). Increased Corrosion Resistance of Zinc Magnesium Aluminum Galvanised Coating through Germanium Additions. In ECS Transactions (pp. 1-15).
https://doi.org/10.1149/07530.0001ecst, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa32175

Goruchwyliaeth

The driving parameters for the cut edge corrosion of galvanised steel substrates with novel organic coatings. (cyfredol)

PhD

Goruchwyliwr arall: Prof Geraint Williams
“Optimisation of Next Generation Galvanising Pot Hardware” (cyfredol)

PhD

Goruchwyliwr arall: Prof David Penney
Corrosion Behaviour of Additively Manufactured High Entropy Alloys (cyfredol)

PhD

Goruchwyliwr arall: Prof Nicholas Lavery
The corrosion and mechanical performance of industry relevant additively manufactured steels and alloys (dyfarnwyd 2023)

PhD

Goruchwyliwr arall: Prof Nicholas Lavery
Prevention of Corrosion in Cast Iron Water Mains (cyfredol)

EngD

Goruchwyliwr arall: Prof David Penney
Development of Novel coatings for boron steel insurance in the hot stamping process (cyfredol)

EngD

Goruchwyliwr arall: Prof David Penney
Characterisation of sustainable materials for can making (cyfredol)

EngD

Goruchwyliwr arall: Dr Eifion Jewell
Understanding the role of thin film pre-treatments on steel surfaces (cyfredol)

EngD

Goruchwyliwr arall: Prof Geraint Williams
Novel additions to enhance galvanic corrosion resistance in magnesium alloys (cyfredol)

EngD

Goruchwyliwr arall: Prof Geraint Williams
Novel coating methods for ground operated airport vehicles (cyfredol)

EngD

Goruchwyliwr arall: Prof David Penney
The factors affecting the corrosion of ductile cast iron (cyfredol)

EngD

Goruchwyliwr arall: Prof Geraint Williams
The Adhesion of Protective Coatings to Novel REACH Compliant Packaging Steel Substrates (dyfarnwyd 2023)

EngD

Goruchwyliwr arall: Dr Eifion Jewell
Addition of alloying agents to improve the performance of Zn/Al metallic coated steel. (cyfredol)

EngD

Goruchwyliwr arall: Prof David Penney
Development of Novel Corrosion resistant Magnesium alloys (cyfredol)

EngD

Goruchwyliwr arall: Prof Geraint Williams
Super duplex stainless steels - the influence of copper and tungsten on the passivity and corrosion resistance. (cyfredol)

MSc

Goruchwyliwr arall: Prof Geraint Williams
Equality, Diversity, and Inclusion Initiatives in Postgraduate Engineering (cyfredol)

MSc

Goruchwyliwr arall: Dr David Rea
The Effect of Copper and Tungsten Addition of the Passivity and Pitting Corrosion Resistance of Super Duplex Stainless Steels (cyfredol)

MSc

Goruchwyliwr arall: Prof Geraint Williams

Modiwlau a Addysgir

EG-387 Materials Degradation and Protection

Materials degradation, the loss in performance of an engineering system, is an evitable part of product life cycle. This can result in a loss of efficiency or even total component failure. Materials degradation processes can therefore lead to severe risks to safety, as well as economic loss. This module will familiarize students with industrially relevant physical, chemical and biological failure mechanisms and provide them with the tools needed to provide feasible engineering solutions to ensure that materials are protected.
EGSM02 Interpersonal Skills for Engineers

The module will cover both presentation and written skills required for successful communication in enigineering. Presentations: Guidelines on making format presentations, considering attention span, visual aids, style, content and balance to ensure a memorable outcome. Preparation for one-on-one discussions, approaches to ensure successful meetings. Body Language: The influence of body language in communication both in formal presentations and in small group discussions. How to read body language in others, and modify your own body position to aid communication. Written: Guidelines on report preparation, including planning,structure and use of figures and tables. Preparation of an abstract, covering length, key issues and style for maximum effectiveness. Each candidate will prepare a detailed project plan covering background to the research, the scheduling of practical and other work, and milestone deliverables. This plan will be produced following: (i) attendance at specialist lectures covering issues of good practice in the conduct of research eg safety, procedures for laboratory work and data reporting/analysis; (ii) discussion with academic and industrial supervisors regarding technical/commercial issues associated with the specific topic; (iii) a review of the formal course units covering technical issues, personal and professional development and research skills. The overall report must demonstrate that each student relates relevant aspects of the training courses to their industry oriented research project.
EGSM03 Literature Review of Industrial Problem

The module involves the collation, refinement and critique of existing literature surrounding particular problem associated with the research topic elected by the student. The student will gain experience in working independently on a substantial, individually assigned task, using accepted literature review procedures. It will require and develop self-organisation and the critical evaluation of existing literature with a view to producing a comprehensive review of the current knowledge on the prescribed topic. Assessment of the literature review will be in the form of a 25 page review paper and a 30 min oral viva examination.
EGSM34 Leadership and Complexity Management (EngD)

One of the key skills identified by employers in all sectors and for life in general is the ability to work in a team and to be able to lead! Additionally, there are a number of other skills and traits required or to at least be aware of, to be most effective in these capacities. This module is designed to utilise contemporary psychology theories to develop individual and group awareness of personal attributes and group characteristics salient to leadership and effective membership of a team. This is then applied directly using self and group reflection, discussion and debate and exercises to establish team roles and ¿hammer together¿ pre-defined teams. This will allow them to move closer to being an ¿effective team¿ and ultimately increase success throughout the program. Effective communication will be promoted throughout the module, in terms of leadership and team work alongside engagement with internal and external stakeholders, to include such areas as sales, marketing and personal branding. Successful delivery of engineering business outcomes in a developing or high risk environment requires a detailed understanding of the broader complexities involved. This will include risk analysis and preparation, and an understanding of how your project impacts local stakeholders, in particular cultural issues, local politics and vested interests. This module will explore these complexities and develop strategies to enable successful delivery by seeking to address the potential risk during the programme¿s inception as opposed to reacting to unforeseen circumstances during operations. The module will equip participants with the skills and methodology to deliver programmes in environments that would normally be the preserve of the UN, DFID, specific NGOs or the Military.
EGTM103 Degradation of materials

To provide a detailed overview of: The fundamentals of corrosion theory for metals and degradation of organic coatings, The mechanisms of different corrosion types and their identification in real world situations The application of corrosion protection techniques through case studies
EGTM98 Electrochemistry

Electrochemistry basic principles including: Electrode potentials, Nernst equation, dynamic electrochemistry including current-voltage relationships. Potentiostat based electrochemistry methods including potentiodynamic, potentiostatic, galvanostatic and cyclic voltammetric techniques. Applications of potentiostat-based electrochemistry methods, especially in corrosion and coatings research. Advanced electrochemical scanning techniques: basic principles of operation, design and applications. Scanning reference and vibrating electrode techniques (SRET and SVET) and scanning electrochemical microscopy (SECM) applied to corrosion research. Introduction to electrochemical techniques for characterising organic coated metals. Basic principles of electrochemical impedance spectroscopy and applications in evaluating corrosion protection of metals using coatings. The scanning Kelvin probe technique: principles of operation, design of instrumentation and applications in the study of corrosion protection of metals by organic coatings.

Grantiau a Phrosiectau Allweddol

COATED 2015 2015

Canolfan EPSRC ar gyfer hyfforddiant doethurol mewn haenu swyddogaethol diwydiannol, £6.3 miliwn
COATED 2013 2013

EPSRC/Canolfan ESF ar gyfer hyfforddiant doethurol, £3.5 miliwn
METaL 2012 2012

Dysgu seiliedig ar waith ESF, £1.4 miliwn
STRIP 2012 2012

Cyfarwyddwr ESF, £6.6 miliwn
SPECIFIC 2011 2011

Canolfan arloesi a gwybodaeth PENODOL EPSRC/TSB – Cyd-ymchwilydd, £10 miliwn
Materials Live 2012 2012

Grant allgymorth STEM – Cyd-Archwiliwr, £140,000

Yr Athro James Sullivan

Rhif ffôn

Cyfeiriad ebost

Dolenni Ymchwil

Trosolwg

Uchafbwyntiau Gyrfa

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Holl Ymchwil

Erthyglau Cylchgronau

Cyfraniadau Cynadleddau

Goruchwyliaeth

The driving parameters for the cut edge corrosion of galvanised steel substrates with novel organic coatings. (cyfredol)

“Optimisation of Next Generation Galvanising Pot Hardware” (cyfredol)

Corrosion Behaviour of Additively Manufactured High Entropy Alloys (cyfredol)

The corrosion and mechanical performance of industry relevant additively manufactured steels and alloys (dyfarnwyd 2023)

Prevention of Corrosion in Cast Iron Water Mains (cyfredol)

Development of Novel coatings for boron steel insurance in the hot stamping process (cyfredol)

Characterisation of sustainable materials for can making (cyfredol)

Understanding the role of thin film pre-treatments on steel surfaces (cyfredol)

Novel additions to enhance galvanic corrosion resistance in magnesium alloys (cyfredol)

Novel coating methods for ground operated airport vehicles (cyfredol)

The factors affecting the corrosion of ductile cast iron (cyfredol)

The Adhesion of Protective Coatings to Novel REACH Compliant Packaging Steel Substrates (dyfarnwyd 2023)

Addition of alloying agents to improve the performance of Zn/Al metallic coated steel. (cyfredol)

Development of Novel Corrosion resistant Magnesium alloys (cyfredol)

Super duplex stainless steels - the influence of copper and tungsten on the passivity and corrosion resistance. (cyfredol)

Equality, Diversity, and Inclusion Initiatives in Postgraduate Engineering (cyfredol)

The Effect of Copper and Tungsten Addition of the Passivity and Pitting Corrosion Resistance of Super Duplex Stainless Steels (cyfredol)

Modiwlau a Addysgir

EG-387 Materials Degradation and Protection

EGSM02 Interpersonal Skills for Engineers

EGSM03 Literature Review of Industrial Problem

EGSM34 Leadership and Complexity Management (EngD)

EGTM103 Degradation of materials

EGTM98 Electrochemistry

Grantiau a Phrosiectau Allweddol

COATED 2015 2015

COATED 2013 2013

METaL 2012 2012

STRIP 2012 2012

SPECIFIC 2011 2011

Materials Live 2012 2012